Abstract: Tapping Machine is widely used in machinery industry porous parts drilling tapping processing. The correct operation of automatic tapping machine is very important.
The operating method about automatic tapping machine, mainly include:
1, when automatic tapping machine pressure adjustment, in turn the knob, please pull up, then the rotation, pressure rotating knob for positioning. Rotate knob to the right to raise the outlet pressure, rotation of the lower outlet pressure to the left. Adjust the pressure should be gradually evenly to the required pressure value, should not step adjustment in place.
2, automatic tapping machines for filtering pressure drainage pressure drainage with a manual drain two ways. Manual drainage when the water level below the level reached before the filter must be drained.
3, tapping machines before operation, check whether the main lock bolt is strong, the power switch and circuit whether in good condition. In accordance with provisions clothing labor insurance supplies, Non- tapping personnel and non licensed tapping personnel based mount guard.
4, before the operation, must be provided for refueling site;
5, before tapping, must put the tapping required artifacts, tools and so on placed neatly, and handy.
6, debugging tapping machine tap tapping size and depth dimensions to meet the requirements before you start the job. Prevent slippery tooth and tooth enough.
7, tapping discharged debris (iron slag powder, etc.), there should be space or cavity to facilitate the sundries is discharged. Clean up at any time.
8, tapping machine often self-test workpiece quality.