Abstract: When you have parts need to drill tapping operation, often think of using automatic tapping machine for automatic processing. At work, why automatic tapping machine tapping unstable?
Size is not very big parts when the production batch is large often need to automatic processing, such as using a dedicated machine tools, automatic lathe to save costs, improve production efficiency, saves the manual labor intensity. When you have parts need to drill tapping operation, often think of using automatic tapping machine for automatic processing. But many enterprises found that often encounter when using automatic tapping machine operation is not very stable? Why automatic tapping machine tapping unstable? Below PURROS company is combining with the actual production together with you to discuss.
1, stop tapping machine tapping tip wear or spring relaxation weakness. Should check block stop tapping machine tapping pin has not worn lead to uneven, then check the springs are too loose or replacement springs.
2, material deformation or chucks excessive residue. It should be more checks and cleanup chuck.
3, tapping machine tapping small belt is too loose. Will be fixed tappers out four small screws are loose, then press down tapping machine, and then to tighten the four screws.
4, automatic tapping machine tapping belt adjustment is not tight enough or belt damage causes slipping. Tapping machine tapping triangle belt is too loose behind the adjustment screw to adjust the machine to adjust to the appropriate state or replace belt.
5, cam stop switch positions are wrong. If you start is too slow can lead tapping machine tapping instability.
6, automatic tapping machine brake clutch badness, can change brake block or replacing Tapping Machine.
7, the micro switch broken, replace a new micro switch.
TAGS:
Tapping is not stable, Automatic tapping machine, Tapping factory house, Tapping machine advantages